English

Oxygen gas cylinder

Item No.: GB5099
The high-pressure Carbon gas cylinders produced by our company are widely used for filling industrial special gas, standard gas, mixed gas and high-purity gas.According to the special requirements of filling gas.
¥0.00
Description




 


GB5099 steel seamless gas cylinder




Classification 

GB5099 steel seamless gas cylinders are divided into three categories according to the physical state of the loaded medium.
   ♦permanent gas cylinder
     A gas with a critical temperature below -10 ° C is called a permanent gas, and a gas cylinder containing a permanent gas is called a permanent gas cylinder. For example, cylinders containing oxygen, nitrogen, air, carbon monoxide, and inert gases are examples of this type.
  ♦ liquefied gas cylinder
    The various gases whose critical temperature is equal to or higher than -10 ° C are gaseous at normal temperature and normal pressure, and become liquid after being pressurized and cooled. Among these gases, some have higher critical temperatures (above 70 ° C), such as H2S, ammonia, propane, liquefied petroleum gas, etc., called high critical temperature liquefied gases, also known as low pressure liquefied gases.
 ♦dissolved gas cylinder
  This cylinder is a cylinder for acetylene. Since acetylene gas is extremely unstable, especially under high pressure, it is easy to polymerize or decompose. The acetylene after liquefaction is slightly vibrated, which will cause an explosion. Therefore, it cannot be filled in a compressed gas state, and acetylene must be dissolved in a solvent (common acetone). Medium, and filled with a porous substance (such as calcium silicate porous material, etc.) as an absorbent.





 







Specific parameters



 
Model  Outer diameter (mm)  Volume (L)  Length (mm)  Weight (kg)  Working pressure (Mpa)  Test pressure (Mpa)  Design wall thickness  Bottle material 
WGA108-1.5-15  108  1.5  255  2.7  15  22.5  2.6  30CrMo 
WGA108-1.5-15  108  315  3.1  15  22.5  2.6  30CrMo 
WGA108-1.5-15  108  2.5  375  3.5  15  22.5  2.6  30CrMo 
WGA108-1.5-15  108  435  3.9  15  22.5  2.6  30CrMo 
WGA108-1.5-15  108  3.4  485  4.5  15  22.5  2.6  30CrMo 
WGA108-1.5-15  108  555  4.9  15  22.5  2.6  30CrMo 
WGA108-1.5-15  108  4.6  640  5.5  15  22.5  2.6  30CrMo 
WGA108-1.5-15  108  675  5.7  15  22.5  2.6  30CrMo 
 
Model  Outer diameter (mm)  Volume (L)  Length (mm)  Weight (kg)  Working pressure (Mpa)  Test pressure (Mpa)  Design wall thickness  Bottle material 
WGA133-3.0-15  133  320  4.7  15  22.5  3.0  30CrMo 
WGA133-3.4-15  133  3.4  355  5.2  15  22.5  3.0  30CrMo 
WGA133-3.6-15  133  3.6  370  5.4  15  22.5  3.0  30CrMo 
WGA133-4-15  133  400  5.8  15  22.5  3.0  30CrMo 
WGA133-5-15  133  490  6.7  15  22.5  3.0  30CrMo 
WGA133-6-15  133  570  7.5  15  22.5  3.0  30CrMo 
WGA133-6.7-15  133  6.7  625  8.1  15  22.5  3.0  30CrMo 
WGA133-8-15  133  740  9.4  15  22.5  3.0  30CrMo 
WGA133-10-15  133  10  900  11.1  15  22.5  3.0  30CrMo 
 
Model  Outer diameter (mm)  Volume (L)  Length (mm)  Weight (kg)  Working pressure (Mpa)  Test pressure (Mpa)  Design wall thickness  Bottle material 
WGA140-3.4-15  140  3.4  340  6.5  15  22.5  3.6  30CrMo 
WGA140-4-15  140  390  7.1  15  22.5  3.6  30CrMo 
WGA140-5-15  140  460  8.3  15  22.5  3.6  30CrMo 
WGA140-6-15  140  530  9.4  15  22.5  3.6  30CrMo 
WGA140-6.8-15  140  6.8  575  10  15  22.5  3.6  30CrMo 
WGA140-7-15  140  600  10.5  15  22.5  3.6  30CrMo 
WGA140-7.4-15  140  7.4  640  11  15  22.5  3.6  30CrMo 
WGA140-8-15  140  690  12  15  22.5  3.6  30CrMo 
WGA140-9-15  140  770  13  15  22.5  3.6  30CrMo 
WGA140-10-15  140  10  840  14  15  22.5  3.6  30CrMo 
WGA140-4-20  140  385  7.4  20  30  3.7  34CrMo4 
WGA140-4-20  140  465  8.8  20  30  3.7  34CrMo4 
WGA140-4-20  140  565  10.2  20  30  3.7  34CrMo4 
WGA140-4-20  140  620  11.1  20  30  3.7  34CrMo4 
WGA140-4-20  140  700  12.2  20  30  3.7  34CrMo4 
WGA140-4-20  140  775  13.3  20  30  3.7  34CrMo4 
WGA140-4-20  140  10  850  14.5  20  30  3.7  34CrMo4 
 
Model  Outer diameter (mm)  Volume (L)  Length (mm)  Weight (kg)  Working pressure (Mpa)  Test pressure (Mpa)  Design wall thickness  Bottle material 
WGA165-7-15  165  490  12  15  22.5  4.3  34CrMo4 
WGA165-8-15  165  540  13  15  22.5  4.3  34CrMo4 
WGA165-10.3-15  165  10.3  650  15  15  22.5  4.3  34CrMo4 
WGA165-12-15  165  12  750  17  15  22.5  4.3  34CrMo4 
WGA165-15-15  165  15  915  21  15  22.5  4.3  34CrMo4 
WGA165-20-15  165  20  1180  26  15  22.5  4.3  34CrMo4 
WGA165-7-15  165  490  12  15  22.5  4.0  34CrMo4 
WGA165-8-15  165  540  13  15  22.5  4.0  34CrMo4 
WGA165-10-15  165  10  640  14.5  15  22.5  4.0  34CrMo4 
WGA165-12-15  165  12  750  17  15  22.5  4.0  34CrMo4 
WGA178-7-20  178  420  12  20  30  4.6  30CrMo 
WGA178-8-20  178  465  13  20  30  4.6  30CrMo 
WGA178-10-20  178  10  555  15  20  30  4.6  30CrMo 
WGA178-11-20  178  11  600  16.2  20  30  4.6  30CrMo 
WGA178-12-20  178  12  645  17  20  30  4.6  30CrMo 
WGA178-15-20  178  15  785  20  20  30  4.6  30CrMo 
WGA178-20-20  178  20  1015  25  20  30  4.6  30CrMo 
WGA178-21-20  178  21  1060  26  20  30  4.6  30CrMo 
WGA178-24-20  178  24  1195  29.5  20  30  4.6  30CrMo 
WGA178-27-20  178  27  1320  32.5  20  30  4.6  30CrMo 
 
Model  Outer diameter (mm)  Volume (L)  Length (mm)  Weight (kg)  Working pressure (Mpa)  Test pressure (Mpa)  Design wall thickness  Bottle material 
WMA140-3.4-15  140  3.4  340  6.5  15  22.5  3.6  37Mn 
WMA140-4-15  140  390  7.1  15  22.5  3.6  37Mn 
WMA140-5-15  140  460  8.3  15  22.5  3.6  37Mn 
WMA140-6-15  140  530  9.4  15  22.5  3.6  37Mn 
WMA140-6.8-15  140  6.8  575  10  15  22.5  3.6  37Mn 
WMA140-7-15  140  600  10.5  15  22.5  3.6  37Mn 
WMA140-7.4-15  140  7.4  640  11  15  22.5  3.6  37Mn 
WMA140-8.0-15  140  690  12  15  22.5  3.6  37Mn 
WMA140-9.0-15  140  770  13  15  22.5  3.6  37Mn 
WMA140-10.0-15  140  10  840  14  15  22.5  3.6  37Mn 
WMA140-10.2-15  140  10.2  850  14.2  15  22..5  3.6  37Mn 
WMA140-13.4-15  140  13.4  1090  17.5  15  22.5  3.6  37Mn 
 
Model  Outer diameter (mm)  Volume (L)  Length (mm)  Weight (kg)  Working pressure (Mpa)  Test pressure (Mpa)  Design wall thickness  Bottle material 
WMA165-7-15  165  490  12  15  22.5  4.3  37Mn 
WMA165-8-15  165  540  13  15  22.5  4.3  37Mn 
WMA165-9.5-15  165  9.5  615  14.5  15  22.5  4.3  37Mn 
WMA165-10-15  165  10  630  14.5  15  22.5  4.3  37Mn 
WMA165-10.3-15  165  10.3  650  15  15  22.5  4.3  37Mn 
WMA165-12-15  165  12  750  17  15  22.5  4.3  37Mn 
WMA165-13-15  165  13  805  18.3  15  22.5  4.3  37Mn 
WMA165-13.5-15  165  13.5  840  19  15  22.5  4.3  37Mn 
WMA165-15-15  165  15  915  21  15  22.5  4.3  37Mn 
  
Model  Outer diameter (mm)  Volume (L)  Length (mm)  Weight (kg)  Working pressure (Mpa)  Test pressure (Mpa)  Design wall thickness  Bottle material 
WMA219-20-15  219  20  740  15  22.5  5.7  37Mn 
WMA219-25-15  219  25  890  35  15  22.5  5.7  37Mn 
WMA219-27-15  219  27  950  37  15  22.5  5.7  37Mn 
WMA219-28-15  219  28  970  38  15  22.5  5.7  37Mn 
WMA219-35-15  219  35  1180  45  15  22.5  5.7  37Mn 
WMA219-36-15  219  36  1210  46  15  22.5  5.7  37Mn 
WMA219-38-15  219  38  1270  48  15  22.5  5.7  37Mn 
WMA219-40-15  219  40  1330  50  15  22.5  5.7  37Mn 
WMA219-47-15  219  47  1540  57  15  22.5  5.7  37Mn 
 
Model  Outer diameter (mm)  Volume (L)  Length (mm)  Weight (kg)  Working pressure (Mpa)  Test pressure (Mpa)  Design wall thickness  Bottle material 
WZA232-36-15  232  36  1080  42  15  22.5  5.4  37Mn 
WZA232-38-15  232  38  1130  44  15  22.5  5.4  37Mn 
WZA232-40-15  232  40  1180  46  15  22.5  5.4  37Mn 
WZA232-43.3-15  232  43.3  1270  49  15  22.5  5.4  37Mn 
WZA232-44-15  232  44  1295  49.5  15  22.5  5.4  37Mn 
WZA232-45-15  232  45  1320  50  15  22.5  5.4  37Mn 
WZA232-46.7-15  232  46.7  1365  52  15  22.5  5.4  37Mn 
WZA232-47-15  232  47  1370  52  15  22.5  5.4  37Mn 
WZA232-50-15  232  50  1450  55  15  22.5  5.4  37Mn 
WZA267-50-15  267  50  1140  59  15  22.5  6.3  37Mn 
WZA267-58-15  267  58  1300  66  15  22.5  6.3  37Mn 
WZA267-60-15  267  60  1340  70  15  22.5  6.3  37Mn 
WZA267-68-15  267  68  1500  76  15  22.5  6.3  37Mn 
WZA267-70-15  267  70  1540  78  15  22.5  6.3  37Mn 
WZA267-80-15  267  80  1740  87  15  22.5  6.3  37Mn 
WZA267-82-15  267  82  1780  88  15  22.5  6.3  37Mn 
WZA267-60-15  267  60  1340  70  15  22.5  6.3  30CrMo 
WZA267-68-15  267  68  1500  78  15  22.5  6.3  30CrMo 
WZA267-70-15  267  70  1540  80  15  22.5  6.3  30CrMo 
WZA267-80-15  267  80  1750  89  15  22.5  6.3  30CrMo 
 





Show details

 
 


40L cylinder parameters


 
Name   Steel seamless gas cylinder 
Outer diameter  219mm 
Height (without valve)  1315mm 
Height (including valve)  1450mm 
Weight  48kg 
Ambient temperature  -20-60°C 
Nominal work pressure  15Mpa 
Hydrostatic test pressure  22.5Mpa 
Airtight test pressure  15Mpa 
Filling medium  permanent gas, high pressure liquefied gas 
Nominal volume  40L 
Main material  37Mn (manganese steel)  
Design life  30 years 
Design wall thickness  ≥5.7mm 
Executive standard  GB5099 

 



15L cylinder parameters

 

Name   Steel seamless gas cylinder 
Outer diameter  159mm 
Height (without valve)  956mm 
Height (including valve)  1050mm 
Weight  19kg 
Ambient temperature  -20-60°C 
Nominal work pressure  15Mpa 
Hydrostatic test pressure  22.5Mpa 
Airtight test pressure  15Mpa 
Filling medium  permanent gas, high pressure liquefied gas 
Nominal volume  15L 
Main material  37Mn (manganese steel)  
Design life  30 years 
Design wall thickness  ≥4.2mm 
Executive standard  GB5099 
 



10L cylinder parameters

 

Name   Steel seamless gas cylinder 
Outer diameter  152mm 
Height (without valve)  710mm 
Height (including valve)  820mm 
Weight  13.5kg 
Ambient temperature  -20-60°C 
Nominal work pressure  15Mpa 
Hydrostatic test pressure  22.5Mpa 
Airtight test pressure  15Mpa 
Filling medium  permanent gas, high pressure liquefied gas 
Nominal volume  10L 
Main material  37Mn (manganese steel)  
Design life  30 years 
Design wall thickness  ≥4.0mm 
Executive standard  GB5099 






 
 






 

Review